Red Deer Carpet Cleaning
 

 Contents [hide] 1 Hot Water Extraction 2 Dry-cleaning 2.1 Dry compound 2.2 Encapsulation 2.3 Bonnet 2.4 Shampoo 2.5 Dry foam carpet cleaning 2.6 Vacuum wash 3 Household processes 3.1 Vacuum 3.2 Stain removal 3.3 Other 3.4 Misconceptions 4 References Hot Water Extraction[edit] For more details on this topic, see Hot water extraction. Although there is an actual steam cleaning industrial process, in the context of carpet cleaning, "steam cleaning" is, in fact, hot water extraction cleaning. The hot water extraction cleaning method uses equipment that sprays heated water, sometimes with added cleaning chemicals, on the carpet. Simultaneously, the water is vacuumed up, along with any dislodged and dissolved dirt. Many carpet manufacturers recommend professional hot water extraction as the most effective carpet cleaning method.[citation needed] Actual steam could damage man-made carpet fibers or shrink natural fibers such as wool.[citation needed] Hot water extraction equipment may be a portable unit that plugs into an electrical outlet, or a truck mount carpet cleaner requiring long hoses from the truck or trailer. Truck mounted equipment may be used where electricity is unavailable (e.g. if electrical service was terminated). Truck mount carpet cleaning may be unsuited to premises distant from a driveway or road, and hoses may need to pass through windows to reach upper floors of a building. Hoses needed for truck mount and professional portable carpet cleaning may present an inconvenience or tripping hazard to users of hallways, and pets or children can escape through doors that must be left ajar for hoses. Heated or air conditioned air will also escape from buildings when doors are left open for hoses, potentially creating a significant waste of energy. Truck mounted carpet cleaning equipment minimizes noise in the room being cleaned, but truck mounted carpet cleaning equipment may cause noise and air pollution offensive to neighbors, and may violate anti-idling bylaws in some jurisdictions. However, truck-mounted cleaning is much faster than portable equipment, and extra heat and power can give faster drying times. A Rug Doctor rental carpet cleaning machine. A common process of hot water extraction [1] begins with preconditioning. Alkaline agents such as ammonia solution for synthetic carpets, or acidic solution (such as vinegar solution) for woolen carpets, are sprayed into the carpet, then agitated with a grooming brush or an automatic scrubbing machine. Next, a pressurized manual or automatic cleaning tool (such as a wand) passes over the surface to rinse out all pre-conditioner, residue, and particulates. If an alkaline detergent is used on a woolen fibre, use of an acetic acid solution will restore neutral fiber pH. The acid rinse thus neutralizes the alkaline residues, and can contribute to softening cleaned fabrics.[2] The hot water extraction method is the preferred method of many carpet manufacturers.[citation needed] Extraction is, by far, the most important step in the hot water extraction process. Since the hot-water extraction method uses much more water than other methods like bonnet or shampoo cleaning, proper extraction and air flow are critical to avoid drying issues.

Clean Your Carpets Better Than The Pro's

 Drying time may also be decreased by extra use of fans, air conditioning, and/or outdoor ventilation.[3] Older surfaces, such as double jute-backed carpets and loose rugs with natural foundation yarns, could shrink after a wet treatment, leading to suppositions that wet-cleaning could also remove wrinkles.[citation needed] However, this notion is antiquated and this method could also occasionally tear seams or uproot strips.[citation needed] Newer carpets, such as with synthetic backing and foundation yarns, do not shrink, and they smooth easily; in such carpets, wrinkles indicate an underlying problem, such as adhesive, that may need a certified carpet inspector to determine.[4] Wet-cleaning systems naturally require drying time, which may lead to concerns about very slow drying, the risk of discoloration returning during drying, and odors, bacteria, fungi, molds, and mildews. 

How to professional carpet cleaning dirty carpets

 Unsourced material may be challenged and removed. (March 2015) (Learn how and when to remove this template message) A 98% biodegradable or others,[5] slightly moist absorbent cleaning compound may be spread evenly over carpet and brushed or scrubbed in. For small areas, a household hand brush can work such a compound into carpet pile; working like "tiny sponges", the attracted cleaning solution dissolve dirt, dirt and grime is attracted/absorbed to the compound, after a short drying time (the cleaning solution which is attracted to the compound must evaporate), it will be removed with a vacuum cleaner, the drier the better, leaving carpet immediately clean and dry. But it's very difficult to remove all residues, the residues can cause allergies and biological compounds may cause discolourations on carpets. For commercial applications, a specially designed cylindrical counter-rotating brushing system is used, without a vacuum cleaner.